Determine a suitable location for the G-17 to wall-mount and complete any wiring to it before mounting to the wall. DO NOT CEILING-MOUNT.
With a pencil, mark on wall two pilot hole locations 12 inches (30.48cm) horizontally apart.
Pre-drill pilot holes in marked locations. If drilling into a wall stud (ideal) it is recommended to use #10 mounting screws (not included) to mount the G-17 Air.
If there is no stud, install wall anchors (not included) into the pilot holes to hold G-17 Air instead. Wall anchors should be rated to at least 8 lbs. (3.63 kg).
